 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| SAW Components Data Sheet B5035 SAW Components Low-Loss Filter Data Sheet Features q q q q q B5035 208,0 MHz Ceramic package QCC10B IF low-loss filter for W-CDMA base station Usable bandwidth 3,84 MHz Balanced or unbalanced operation possible Temperature stable Ceramic SMD package Terminals q Gold plated Dimensions in mm, appr. weight 0,23 g Pin configuration 10, 9 5, 4 1, 3, 6, 8 2, 7 Input Output Case ground To be grounded Type B5035 Ordering code B39211-B5035-Z710 Marking and Package according to C61157-A7-A49 Packing according to F61074-V8172-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps -40 / +85 -40 / +85 0 0 C C V dBm 2 Sep 23, 2005 SAW Components Low-Loss Filter Data Sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: B5035 208,0 MHz T = +5 ... +75 C ZS = 200 balanced and matching network ZL = 200 balanced and matching network min. typ. 208,0 11 4,2 0,6 5 1,1 2,6 1,134 max. -- 13 -- 1,0 -- 1,5 6,0 MHz dB MHz dB % Nominal frequency Minimum insertion attenuation Passband width Amplitude ripple (p-p) Phase ripple (p-p) Phase ripple (rms) Error vector magnitude rel 1 dB fN min -- -- -- -- -- -- -- 1,129 B1dB fN 1,92 MHz fN 1,92 MHz fN 1,92 MHz EVM Absolute group delay (mean within fN1,92 MHz) mean Relative attenuation (relative to min) fN 2,515 MHz ... fN 2,6 MHz fN 2,6 MHz ... fN 2,8 MHz fN 2,8 MHz ... fN 3,3 MHz fN 3,3 MHz ... fN 20 MHz fN 20 MHz ... fN 28 MHz fN 28 MHz ... fN 60 MHz Adjacent channel selectivity 5,0 MHz offset of carrier Input IP3 Temperature coefficient of frequency 3) Turnover temperature 1) Except 2) Except 1,139 s rel 17 25 30 40 1) 45 55 2) 20 30 35 45 50 60 -- -- -- -- -- -- dB dB dB dB dB dB ACS 45 40 49 -- - 0,036 20 -- -- -- -- dB dBm ppm/K2 C TCf T0 -- -- for two narrow-band responses between 219 and 222 MHz which may reach 2 dB above for two narrow-band responses between 236 and 240 MHz which may reach 2 dB above dependance of fc: 3) Temperature fc(TA) = fc(T0)(1 + TCf(TA - T0)2) 3 Sep 23, 2005 SAW Components Low-Loss Filter Data Sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: B5035 208,0 MHz T = -40 ... +85 C ZS = 200 balanced and matching network ZL = 200 balanced and matching network min. typ. 208,0 11 4,2 0,6 5 1,1 2,6 1,134 max. -- 13,2 -- 1,2 -- 1,5 6,0 MHz dB MHz dB % Nominal frequency Minimum insertion attenuation Passband width Amplitude ripple (p-p) Phase ripple (p-p) Phase ripple (rms) Error vector magnitude rel 1 dB fN min -- -- -- -- -- -- -- 1,129 B1dB fN 1,92 MHz fN 1,92 MHz fN 1,92 MHz EVM Absolute group delay (mean within fN1,92 MHz) mean Relative attenuation (relative to min) fN 2,515 MHz ... fN 2,6 MHz fN 2,6 MHz ... fN 2,8 MHz fN 2,8 MHz ... fN 3,3 MHz fN 3,3 MHz ... fN 20 MHz fN 20 MHz ... fN 28 MHz fN 28 MHz ... fN 60 MHz Adjacent channel selectivity 5,0 MHz offset of carrier Input IP3 Temperature coefficient of frequency 3) Turnover temperature 1) Except 2) Except 1,139 s rel 17 25 30 40 1) 45 55 2) 20 30 35 45 50 60 -- -- -- -- -- -- dB dB dB dB dB dB ACS 45 40 49 -- - 0,036 20 -- -- -- -- dB dBm ppm/K2 C TCf T0 -- -- for two narrow-band responses between 219 and 222 MHz which may reach 2 dB above for two narrow-band responses between 236 and 240 MHz which may reach 2 dB above dependance of fc: 3) Temperature fc(TA) = fc(T0)(1 + TCf(TA - T0)2) 4 Sep 23, 2005 SAW Components Low-Loss Filter Data Sheet Matching network to 200 Transformers are only required for measurement in a 50 environment B5035 208,0 MHz Ls1 Lp1 1:4 Ls1 Lp2 Ls4 Lp3 Ls4 4:1 Ls1 = 100 nH Lp2 = 100 nH Lp1 = 560 nH (for trimming) Element values depend upon board layout. Lp3 = 150 nH Ls4 = 150 nH 5 Sep 23, 2005 SAW Components Low-Loss Filter Data Sheet Transfer function B5035 208,0 MHz Transfer function (pass band) 6 Sep 23, 2005 SAW Components Low-Loss Filter Data Sheet B5035 208,0 MHz Published by EPCOS AG Surface Acoustic Wave Components Division, SAW COM P.O. Box 80 17 09, 81617 Munich, GERMANY (c) EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS' prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 7 Sep 23, 2005 |
Price & Availability of B39211-B5035-Z710
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |